1, To understand the variable speed’s shape and connection size.
2, The variable speed drives IKO bearings can be placed, and also can be placed vertically or inclined. It Can be both positive and negative rotation.
3, The variable speed drives IKO bearings whether choose installation method,they all have size requirementswith its couplings .
4, The variable speed drives IKO bearings axial positioning: either three times around the axial positioning, the other two axes are no longer axial positioning.
5, The rotation orientation; outer ring and inner ring are flat key position. The circle is to use the drive position.
6, The variable speed drives on the IKO bearings can withstand the smaller radial force, but should not bear a greater workload.
7, The transmission ratio, they are installed according to the first mode of the transmission ratio. If you use other installation methods, you should calculate the transmission ratio.
8 In the rated speed (1500rpm), according to the transmission ratio and the required power (Kw) , you can select variable speed drive IKO Bearing.
9, When you choose the torque as the basis to work, you need to select a appropriate model.
10, The selection of gear models is same as variable speed drive IKO bearings .