In order to make the bearing keep its performance and functions long and well condition,it’s nesscessary to check the bearings at regular time.
First is Clearings.
Use a camera to record the bearings apperance before dismounting and make sure that the amount of lubricant is and lubricant sampling, then start clearing bearing.
A, bearing cleaning sub-rough Rough wash and Pecision Cleaning.Remember put a metal grid in the bottom of the washing container.
B, Rough wash, with brush, remove grease or adhesions in oil. Attention, If rolling bearing in oil, it will damage the rolling surface by the impurity.
C, Pecision Cleaning.Roll the bearing in the oil slowly and must be carefully.
Commonly, cleaning agent is neutral, without water, diesel or kerosene.Aaccording to the reality, Temperature of the lye also can be used sometimes.
No matter using which kind of cleaning agent, must often filtered to keep the clearing agent clean. After cleaning, immediately coating antirust oil or rust grease on the bearing is needed.With these, the bearings can work efficient and durable.This method can be use in SKF bearings, NSK bearings and INA bearings and so on bearings .